HUA POWER Waterproof IP54 12KW/43KWH All-in-one BESS Battery Energy Storage System

1 Product Application Introduction

1.1 Scope of application

This specification sheet introduces the specifications of a 12kW/43 kWh battery rack . The entire system consists of a battery system , hybrid inverter, fire protection system, temperature control system, and power distribution system , making it suitable for a variety of application scenarios .

1.2 Application Environment Requirements

The normal working environment of the system should meet the following requirements:

1. Working environment temperature: -20 ℃ ~55 ℃ .
2. Relative humidity ≤ 90% RH, no condensation on live parts.
3. Altitude ≤ 2000m. If the altitude exceeds 2000m, the system needs to be derated.
4. The air should not contain sand and dust that may affect normal operation, as well as conductive, corrosive, or explosive particles and gases;
5. No vibration or shock, vertical tilt ≤ 5°.
6. Other areas with extreme temperatures (such as extreme cold or extreme heat) and marine climates (such as islands) are not within the scope of use of this product.

2 Product Features

• Standard modularity, plug and play, flexible capacity configuration;
• Highly integrated, small footprint, and high energy density per unit volume;
• Advanced BMS control system ensures battery safety and maximizes available capacity;
• bidirectional hybrid inverter is compatible with multiple standard communication interfaces such as Ethernet and RS485 , and has high adaptability;
• Equipped with an intelligent cloud platform to realize data monitoring and data analysis throughout the product life cycle;
• Independently develop EMS control system to achieve intelligent energy scheduling and optimal distribution.

3 Technical Parameters

3.1 System Schematic Diagram

Figure 3-1​ System primary side schematic diagram

3.2 System Parameters

3.2.1 System Parameter Table

Table 3-1 Basic system parameters

No.	type	Parameter items	Parameter value	Remark
1	DC side parameters	Battery cell type	LFP 3.2V/300Ah
2		Rated capacity	46.008 kWh
3		System Configuration	1P16S* 3PACK	Battery pack parallel connection
4		Voltage range	43.2~57.6 V
5		Depth of discharge	90% DOD
6	AC side parameters	Rated power	12 kW
7		Rated voltage	120 / 240 V
8		AC access method	L1/L2/N/PE
9		Rated grid frequency	50/60 Hz​
10		Power Factor	0.8 (leading) ~ 0.8 (lagging)
11	Photovoltaic parameters	Maximum allowable input power	18 kW p
12		Maximum input current	26 A *3
13		Maximum short-circuit current	39 A
14		Maximum input voltage	1000V
15		MPPT voltage range	150~ 9 50V
16		Starting voltage	180V
17		MPPT number /string number	3/2+2+2
18	System parameters	System efficiency	≥85%	0.5 CP
19		Operating temperature	-20 ~ 55 ℃​
20		relative humidity	5%~90%RH	No condensation
21		altitude	＜ 20 00m	Above derating
22		Protection level	IP 20
23		Cooling method	Air cooling
24		noise	≤75dB
25		Communication methods	Ethernet
26		Dimensions (width*height*depth)	509 * 974 * 8 00 mm
27		weight	≤500kg
28		Cycle life	≥6000 Cycles	80% SOH @ Standard

3.2.2 Component parameter table

1. Battery cell parameters

Table 3-2 Basic parameters of battery cells

Serial number	Parameter items	Parameter value	Remark
1	Battery model	LF280K
2	Nominal capacity	300Ah
3	Nominal voltage	3.2V
4	Battery internal resistance	≤0.25mΩ
5	Charging limit voltage	3.65V
6	Discharge cut-off voltage	2.5VT >0 ℃ 2.0VT ≤0 ℃
7	Standard charging power	448W	0.5P
8	Standard discharge power	448W	0.5P
9	25 ℃ standard cycle	6000 Cycles	Under 300±20 kgf clamping force , 25 ℃ ±2 ℃ , 0.5P/0.5P, 2.5~3.65V, energy retention rate ≥80%
10	Charging operating temperature	0~60 ℃
11	Discharge operating temperature	-30~60 ℃
12	Storage temperature	0~35℃ (1 year) -20~45℃ (1 month)
13	Battery weight	5490g±300g
14	Dimensions (width*height*depth)	173.7×207.2×71.7mm	Error: ±0.5m

Table 3-3 Basic parameters of battery modules

Serial number	Parameter items	Parameter value	Remark
1	Grouping method	1P16S	16 cells in series
2	Rated capacity	300Ah
3	Rated voltage	51.2V
4	Voltage range	43.2~57.6V	Corresponding single unit 2.7~3.6V
5	Rated energy	15.368KWh
6	Maximum continuous charge and discharge current	1 5 0A	0.5CP
7	Operating temperature range	0~40 ℃
8	Storage temperature range	-20~45 ℃
9	Dimensions (width*height*depth)	475×230×704mm
10	weight	103 kg

Figure 3- 4 Inverter appearance ( for reference only )

Table 3- 4 Inverter parameter table

Serial number	Parameter Type	Parameter items	Parameter value	Remark
1	DC side	Battery voltage range	40 ~ 60 V
2		Maximum charge and discharge current	250 A
3	AC side(Grid-connected )	Voltage range	120 / 240 VL1/L2/N/PE
4		Rated power	12 kW
5		Maximum continuous input/ output current	50 A
6		Rated frequency	50 Hz / 60 Hz
7		Power Factor	0.8 Lead – 0.8 Lag
8		Switching time	< 10ms
9		Maximum output overcurrent protection	250V/125A
10	AC side(Off-grid )	Rated output voltage	120 / 240 VL1/L2/N/PE
11		Rated active power output	12kW
12		Rated apparent power output	12kVA
13		Rated output current	50A
14		Rated frequency	50 Hz / 60 Hz
15		AC maximum output power	2 times rated power	Lasts 10 seconds
16	efficiency	MPPT efficiency	99.5%
17		California Efficiency	96.5%
18		Maximum efficiency	97.5%
19	System parameters	Storage temperature	-25 ~ +60°C
20		Operating temperature	-25 ~ +60°C	>45℃ derating to 60%
21		Ambient humidity	0 – 95%	No condensation
22		show	LED+APP
23		Protection level	IP6 5
24		Maximum operating altitude	≤4000m	>2000m derating
25		Communication interface	RS485/WiFi/CAN ( optional : Bluetooth /LAN /4G/Meter)
26		Dimensions (W* H * D )	448* 756 *2 42 mm
27		weight	45 kg
28		Certification	IEEE1547,CA RULE21,HECO SRD V2.0,UI1741,UL1741 SA/SB,CSA C22.2. UL1699B.

4 sizes

4.1​ Battery rack dimensions

Figure 4-1​  Battery rack dimensions

5. Notes

5.1 Packaging and Shipping Instructions

1. For domestic shipments, products are packaged in cartons that meet industry standards. Transportation is by land.

2. When shipping internationally, the product packaging will be in wooden crates (UN crates) that meet ocean freight requirements. Products shipped internationally meet the UN3536 full container load certification requirements and are shipped internationally.

3. Please use a forklift during transportation and loading and unloading. Avoid severe mechanical impact, exposure to sunlight, and rain. The product must not be inverted, rolled, or subjected to heavy pressure.

5.2 Instructions for Use

1. Do not immerse the product in water, throw it into fire, or expose it to high temperatures exceeding the temperature conditions specified in this specification for a long time. Improper use and storage of the product may cause the risk of short circuit, fire, explosion, and burns.

2. Do not disassemble, dismantle, or repair the product in any way without authorization. Do not mix batteries of different specifications, brands, or batches.

3. If the product emits an odor, becomes hot, deforms, changes color, or exhibits any other abnormality, do not use it and move it to a safe location. If electrolyte leakage occurs, avoid contact with skin and eyes. In the above cases, please contact the manufacturer for handling;

4. Do not short-circuit the positive and negative terminals of the product. Otherwise, strong current and high temperature may cause personal injury or fire.

5. Customers should place the product on a level surface to avoid mechanical vibration, collision, or pressure shock, otherwise a short circuit may occur inside the product, causing high temperature and fire. Ensure good grounding.

6. Appropriate protective measures must be taken during operation and maintenance of the product. Safety performance testing experiments can only be conducted by professionals equipped with appropriate protective equipment in professional laboratories. Failure to do so may result in serious personal injury and property damage.

7. Dispose of used products promptly according to local recycling or waste regulations;

8. Provide corresponding services and technical support during product installation and use;

9. The customer has a confidentiality obligation for the contents of this specification and shall not disclose it to any third party without authorization.

10. Without the written consent of Huachu, customers, product users and any related parties shall not modify the technical solutions of the products, conduct espionage on the products, or perform reverse engineering, etc.;

11. Huachu reserves the right to modify the product specifications and performance parameters. Before ordering this product, customers need to confirm the latest specifications and performance parameters with Huachu in advance;

12. Acceptance, quality assurance, after-sales and technical services are subject to the commercial agreement between the two parties;

13. If there is any inconsistency between this product specification and other relevant documents provided by Huachu to customers, Huachu reserves the right of final interpretation.